Sanyo XU105 Instruction Manual, PLC-XU105 - Page 29
Auto PC Adjustment
UPC - 086483071386
View all Sanyo XU105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Direct Operation The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control. Remote Control AUTO PC button Menu Operation Auto PC Adj. 1 Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC Adjust Menu icon. 2 Use the Point ▲▼ buttons to move the red frame pointer to Auto PC Adj. and then press the SELECT button twice. To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1-5) in the PC System Menu (p.32). See also "Store" on page 31. PC Adjust Menu PC Adjust Menu icon Move the red frame pointer to Auto PC Adj. and press the SELECT button. "Please wait..." appears while the Auto PC adjustment is in process. Notes: • Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35). 29