Sanyo XU105 Instruction Manual, PLC-XU105 - Page 7
Installing the Projector in Proper Directions, Positioning Precautions - lamp
UPC - 086483071386
View all Sanyo XU105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as shown in the figure below. Bottom Downward (Usual) Front Upward Bottom Upward Front Downward Be sure to set the Lamp control in High and the Fan control in On 3 in the setting menu when using the projector inclined at between +40 degrees to +140 degrees to the horizontal plane at altitudes between 0 and approximately 1,600 meters above sea level. Be sure to set the Fan control in On 2 when using the projector at higher altitudes than the altitudes described above, regardless of the installation position of the projector. (p.52). Positioning Precautions Avoid positioning the projector as described below when installing. 50º 40º 180º 50º 40º 0º 10˚ Do not roll the projector more than 10 degrees from side to side. +50º 0º -50º 10˚ NG Do not put the projector on either side to project an image. GOOD 180º 10˚ 10˚ In upward projection, do not tilt the projector over 10 degrees right and left. In downward projection, do not tilt the projector over 10 degrees right and left. 10˚ 10˚