Sanyo XU105 Instruction Manual, PLC-XU105 - Page 49
Lamp control, Select either Code 1 or Code 2 in this Setting Menu.
UPC - 086483071386
View all Sanyo XU105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Setting Lamp control This function allows you to change brightness of the screen. Auto The brightness according to the input signal (between High and Eco mode). High Brighter than the Normal mode. Normal....... Normal brightness Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Remote control This projector provides two different remote control codes; the factory-set, initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in "Code 2", both the projector and the remote control must be switched to "Code 2". To change the code for the projector; Select either "Code 1" or "Code 2" in this Setting Menu. To change the code for the remote control; Press and hold both the MENU and IMAGE buttons together for 10 seconds or more. After changing the code, make sure the remote control operates properly. Remote control Press and hold MENU and IMAGE buttons for 10 seconds or more. 49