Schwinn 220 Recumbent Bike Assembly and Owner's Manual - Page 17
Attach Water Bottle Holder and Power Cord, Final Inspection
View all Schwinn 220 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
14. Attach Water Bottle Holder and Power Cord Note: Hardware is pre-installed on Mast and not on Hardware Card. 16 10 X2 15. Final Inspection Inspect your machine to ensure that all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. ! Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 17
17
14. Attach Water Bottle Holder and Power Cord
Note:
Hardware is pre-installed on Mast and not on Hardware Card.
15. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
!
Do not use or put the machine into service until the machine has been fully assembled and
inspected for correct performance in accordance with the Owner’s Manual.
10
X2
16