Schwinn 490 Elliptical Service Manual - Page 25
Replacing the Offline Power Supply
View all Schwinn 490 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Section 1 - Replacing the Offline Power Supply to Sensor Hub (DC Power) and/or Lift Motor Control Cables Make sure that power to the machine is disconnected before beginning this step. 1. Using a 4 mm hex wrench, remove the 4 screws (indicated by circles) that secure the Offline Power Supply Cover, and remove it. Offline Power Supply Cover Note: Main Shrouds removed for clarity. Sensor Hub Offline Power Supply 25
25
Section 1 - Replacing the Offline Power Supply
to Sensor Hub (DC Power) and/or Lift Motor
Control Cables
Make sure that power to the machine is discon-
nected before beginning this step.
1.
Using a 4
mm hex wrench, remove the 4 screws
(indicated by circles) that secure the Offline Power Supply
Cover, and remove it.
Sensor Hub
Offline Power
Supply
Note:
Main Shrouds removed for clarity.
Offline
Power
Supply
Cover