Schwinn 490 Elliptical Service Manual - Page 64
Place the new Front Upper Shroud onto the Frame
View all Schwinn 490 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3. Flex the edges of the Front Upper Shroud to disengage the 4 inside tabs (2 on each side) from the Main Shrouds. 4. Place the new Front Upper Shroud onto the Frame Assembly. 5. With the Console Mast, connect the cable to the cable from the Frame Assembly. Align the clips on the cable connectors and make sure the connectors lock. NOTICE: D o not cut or pinch the cables. This step may require two people. 6. Using a 6mm hex wrench, attach the Console Mast to the Main Assembly. NOTICE: M ake sure the Console Cable does not fall into the Console Mast. Do not cut or pinch the cables. Upper Front Shroud X4 6mm 64
64
Upper Front
Shroud
X4
6mm
3.
Flex the edges of the Front Upper Shroud to disengage
the 4 inside tabs (2 on each side) from the Main Shrouds.
4.
Place the new Front Upper Shroud onto the Frame
Assembly.
5.
With the Console Mast, connect the cable to the cable
from the Frame Assembly. Align the clips on the cable
connectors and make sure the connectors lock.
NOTICE:
Do not cut or pinch the cables. This step may
require two people.
6.
Using a 6mm hex wrench, attach the Console Mast to
the Main Assembly.
NOTICE:
Make sure the Console Cable does not fall
into the Console Mast. Do not cut or pinch the
cables.