Schwinn 490 Elliptical Service Manual - Page 52
machine. If the Cable Connectors are secured
View all Schwinn 490 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Note: The Shrouds have been removed from some of the images to provide additional details. 3. Flex the sides of the Sensor Hub Cover to disengage the 2 side tabs. Sensor Hub Cover 4. Remove the connectors from the Sensor Hub after noting their locations. Note: Be sure to note where all cables attach for re-assembly. Do not let the cables fall into the machine. If the Cable Connectors are secured by a small amount of glue, use a pair of small nose pliers to grab and remove the glue. NOTICE: Do not cut or pinch the cables. Note: Main Shrouds removed for clarity. Sensor Hub 52
52
Note:
The Shrouds have been removed from some of
the images to provide additional details.
3.
Flex the sides of the Sensor Hub Cover to disengage
the 2 side tabs.
Note:
Main Shrouds removed for clarity.
Sensor Hub
Cover
Sensor Hub
4.
Remove the connectors from the Sensor Hub after
noting their locations.
Note:
Be sure to note where all cables attach for
re-assembly. Do not let the cables fall into the
machine. If the Cable Connectors are secured by
a small amount of glue, use a pair of small nose
pliers to grab and remove the glue.
NOTICE:
Do not cut or pinch the cables.