Schwinn 520 Elliptical Assembly and Owner's Manual - Page 15

Before You Start

Get Schwinn 520 Elliptical PDF manuals and user guides View all Schwinn 520 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

BEFORE YOU START Moving the Machine The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are all physically fit and able to move the machine safely. 1. Use the Transport Handle to carefully lift the machine onto the transport rollers. 2. Push the machine into position. 3. Carefully lower the machine into position. NOTICE: B e careful when you move the machine. All abrupt motions can affect the computer operation. Leveling the Machine The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust: 1. Place the machine in your workout area. 2. Carefully stand on the front of the Rail Assembly for approximately 20 seconds to determine if the levels are even and balanced with the floor. 3. Step off the machine. 4. Loosen the locking nuts and adjust the levelers until they are evenly balanced and in contact with the floor. Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine can occur. 5. Tighten the locking nuts. Make sure the machine is level and stable before you exercise. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
15
Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure
that you and others are all physically fit and able to move the machine safely.
1.
Use the Transport Handle to carefully lift the machine onto the transport rollers.
2.
Push the machine into position.
3.
Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. All abrupt motions
can affect the computer operation.
BEFORE YOU START
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the RailAssembly is slightly off the floor. To adjust:
1.
Place the machine in your workout area.
2.
Carefully stand on the front of the Rail Assembly for approximately 20 seconds to determine if the levels are even and
balanced with the floor.
3.
Step off the machine.
4.
Loosen the locking nuts and adjust the levelers until they are evenly balanced and in contact with the floor.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to
the machine can occur.
5.
Tighten the locking nuts.
Make sure the machine is level and stable before you exercise.