Schwinn IC3 Indoor Cycling Bike Assembly and Owners Manual - Page 14
Installing Shoe Clips Cleats on Cycling Shoes optional accessory - accessories
View all Schwinn IC3 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing Shoe Clips (Cleats) on Cycling Shoes (optional accessory) Shoe Clips (Cleats) - later version Note: The shoe cleats fit both the right and left Pedals. Tools needed: pliers, 4mm hex key 1. With a pair of pliers, pull off the rubber cover to expose the cleat mounting holes on the bottom of the cycling shoe. Note: This step may not be necessary, depending on the type of shoe. 2. From the bottom of the shoe, put the anti-skid sheet in position over the cleat holes and then a cleat. Be sure the single arrow on the cleat points toward the toe of the shoe. Tighten the cleat mounting bolts (2.5 N·m). 4 mm 3. The cleat has an adjustment range of 20mm front to back and 5mm left to right. Practice engaging with the Pedal and releasing, one shoe at a time. Readjust to determine the best cleat position. 4. Using a 4mm hex key, fully tighten the cleat mounting bolts (5 - 6 N·m). 14