Schwinn Network 3.0 Schwinn Owner's Manual - Page 14

Safety Checklist

Page 14 highlights

BEFORE YOU RIDE SAFETY CHECKLIST Before every ride, it is important to carry out the following safety checks: Brakes • Ensure front and rear brakes work properly. • Ensure brake shoe pads are not overly worn and are correctly positioned in relation to the rims. • Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear. • Ensure brake control levers are lubricated and tightly secured to the handlebar. Wheels and Tires • Ensure tires are inflated to within the recommended pressure as displayed on the tire sidewall. • Ensure tires have tread and have no bulges or excessive wear. • Ensure rims run true and have no obvious wobbles or kinks. • Ensure all wheel spokes are tight and not broken. • Check that axle nuts are tight. If your bicycle is fitted with quick release axles, make sure locking levers are correctly tensioned and in the fully closed position. Steering • Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering. • Ensure that the handlebars are set correctly in relation to the forks and the direction of travel. • Check that the headset locking mechanism is properly adjusted and tightened. • If the bicycle is fitted with handlebar end extensions, ensure they are properly positioned and tightened. Chain • Ensure chain is oiled, clean and runs smoothly. • Extra maintenance is required in wet or dusty conditions. ©2010 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

©2010
SAFETY CHECKLIST
Before every ride, it is important to carry out the following safety checks:
Brakes
Ensure front and rear brakes work properly.
Ensure brake shoe pads are not overly worn and are correctly posi°oned in rela°on to the rims.
Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.
Ensure brake control levers are lubricated and °ghtly secured to the handlebar.
Wheels and Tires
Ensure °res are inflated to within the recommended pressure as displayed on the °re sidewall.
Ensure °res have tread and have no bulges or excessive wear.
Ensure rims run true and have no obvious wobbles or kinks.
Ensure all wheel spokes are °ght and not broken.
Check that axle nuts are °ght. If your bicycle is fi±ed with quick release axles,
make sure locking levers are correctly tensioned and in the fully closed posi°on.
Steering
Ensure handlebar and stem are correctly adjusted and °ghtened, and allow proper steering.
Ensure that the handlebars are set correctly in rela°on to the forks and the direc°on of travel.
Check that the headset locking mechanism is properly adjusted and °ghtened.
If the bicycle is fi±ed with handlebar end extensions, ensure they are properly posi°oned and °ghtened.
Chain
Ensure chain is oiled, clean and runs smoothly.
Extra maintenance is required in wet or dusty condi°ons.
BEFORE YOU RIDE
13