Seagate FreeAgent Pro Classic User Manual - Page 15
Step 4, Lift Module From Base., Press Module into Base
View all Seagate FreeAgent Pro Classic manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
. Figure 2: Lift Module From Base. Step 4: Holding the replacement interface module by its edges, lower it straight down into the base: . Figure 3: Press Module into Base Step 5: Lightly press the module into place using your thumbs until the edges of the module are flush with the base. Step 6: Turn the screw clockwise with your fingers as far as you can. Step 7: Use the coin to turn the screw clockwise no more than a final 1/4 of a turn. The screw needs to be just tight enough to keep it snug against the base. FreeAgent Pro Data Mover 13
FreeAgent Pro Data Mover
13
.
Figure 2:
Lift Module From Base.
Step 4:
Holding the replacement interface module by its edges, lower it straight down into
the base:
.
Figure 3:
Press Module into Base
Step 5:
Lightly press the module into place using your thumbs until the edges of the
module are flush with the base.
Step 6:
Turn the screw clockwise with your fingers as far as you can.
Step 7:
Use the coin to turn the screw clockwise no more than a final 1/4 of a turn. The
screw needs to be just tight enough to keep it snug against the base.