Seagate FreeAgent Pro User Manual - Page 15
Step 4, Lift Module From Base., Press Module into Base
View all Seagate FreeAgent Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
. Figure 2: Lift Module From Base. Step 4: Holding the replacement interface module by its edges, lower it straight down into the base: . Figure 3: Press Module into Base Step 5: Lightly press the module into place using your thumbs until the edges of the module are flush with the base. Step 6: Turn the screw clockwise with your fingers as far as you can. Step 7: Use the coin to turn the screw clockwise no more than a final 1/4 of a turn. The screw needs to be just tight enough to keep it snug against the base. FreeAgent Pro Data Mover 13
FreeAgent Pro Data Mover
13
.
Figure 2:
Lift Module From Base.
Step 4:
Holding the replacement interface module by its edges, lower it straight down into
the base:
.
Figure 3:
Press Module into Base
Step 5:
Lightly press the module into place using your thumbs until the edges of the
module are flush with the base.
Step 6:
Turn the screw clockwise with your fingers as far as you can.
Step 7:
Use the coin to turn the screw clockwise no more than a final 1/4 of a turn. The
screw needs to be just tight enough to keep it snug against the base.