Seagate Pipeline HD Pipeline HD.2 Series SATA Product Manual - Page 12
Table 2, for 500 and 320GB models - 500gb
View all Seagate Pipeline HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Table 2: Drive specifications summary for 500 and 320GB models Drive specification Formatted capacity (512 bytes/sector)* Guaranteed sectors Heads Disks Bytes per sector Default sectors per track Default read/write heads Default cylinders Recording density (max.) Track density (avg) Areal density(avg) Spindle speed Internal data transfer rate (max.) Sustained data transfer rate (max.) I/O data-transfer rate (max.) ATA data-transfer modes supported Cache buffer Height (max.) Width (max.) Length (max.) Weight (typical) Average latency Power-on to ready (typical) Standby to ready (typical) Track-to-track seek time (typical) Average seek (typical) Startup current (typical) 12V (peak) Voltage tolerance (including noise) Operating temperature (drive case temperature) Non-operating temperature (ambient) Temperature gradient (max.) Relative humidity Relative humidity gradient (max.) Wet bulb temperature (max.) Altitude, operating Altitude, non-operating (below mean sea level, max.) ST3500414CS 500GB ST3500312CS 976,773,168 2 1 512 63 16 16,383 1417kb/in 236 ktracks/in 341.5Gb/in2 5900 RPM 1285 Mb/s 120 MB/s 300 MB/s PIO modes 0-4 Multiword DMA modes 0-2 Ultra DMA modes 0-6 16MB 8MB 20.20mm / 0.795 in 101.85mm / 4.010 in 146.99mm / 5.787 in 420g / 0.926 lb 5.1ms