Seagate Pipeline HD Pipeline HD.2 Series SATA Product Manual - Page 15

Drive specification Operational Shock (max.) Non-Operational Shock (max.) Vibration, operating Vibration, non-operating Drive acoustics, sound power Idle** CE Seek Profile Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Contact start-stop cycles Supports Hotplug operation per the Serial ATA Revision 2.6 specification ST3250412CS 70 Gs at 2ms (read) 30 Gs at 2ms (write) 350 Gs at 2ms 5Hz to 22Hz: 0.25 Gs 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs 5Hz to 350Hz: 3.0 Gs 350Hz to 500Hz: 3.0 Gs ST3250312CS ST3160316CS 1.9 bels (typical) 2.1 bels (max.) 2.3 bels (typical) 2.4 bels (max.) 1 per 1015 bits read 0.55% To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 50,000 at 25°C, 50% rel. humidity Yes *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Pipeline HD.2 Series SATA Product Manual, Rev. G 9