Seagate Pipeline HD Pipeline HD.2 Series SATA Product Manual - Page 33

4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA Revision 2.6 (http:// www.sata-io.org). See "S.M.A.R.T. commands" on page 34 for details and subcommands used in the S.M.A.R.T. implementation. Table 8: Supported ATA commands Command name Check Power Mode Configure Stream Device Configuration Freeze Lock Device Configuration Identify Device Configuration Restore Device Configuration Set Device Reset Download Microcode Execute Device Diagnostics Flush Cache Flush Cache Extended Format Track Identify Device Idle Idle Immediate Initialize Device Parameters Read Buffer Read DMA Read DMA Extended Read DMA Without Retries Read Log Ext Read Multiple Read Multiple Extended Read Native Max Address Read Native Max Address Extended Read Sectors Read Sectors Extended Read Sectors Without Retries Read Stream DMA Extended Read Stream Extended Read Verify Sectors Read Verify Sectors Extended Read Verify Sectors Without Retries Recalibrate Security Disable Password Command code (in hex) E5H 51H B1H / C1H B1H / C2H B1H / C0H B1H / C3H 08H 92H 90H E7H EAH 50H ECH E3H E1H 91H E4H C8H 25H C9H 2FH C4H 29H F8H 27H 20H 24H 21H 2AH 2BH 40H 42H 41H 10H F6H Pipeline HD.2 Series SATA Product Manual, Rev. G 27