Seagate ST33000651SS Constellation ES.2 SAS Product Manual - Page 34
Power dissipation
View all Seagate ST33000651SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
7.4 Power dissipation 3TB models in 3Gb operation Please refer to Table 2 for power dissipation numbers. To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 2). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. Figure 2. 3TB models (3Gb) DC current and power vs. input/output operations per second Note. For power details about SED vs. non-SED drive, please refer to section 7.8. 26 Constellation ES.2 SAS Product Manual, Rev. C
26
Constellation ES.2 SAS Product Manual, Rev. C
7.4
Power dissipation
3TB models in 3Gb operation
Please refer to Table 2 for power dissipation numbers.
To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure
2). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5
volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by
3.4123.
Figure 2.
3TB models (3Gb) DC current and power vs. input/output operations per second
Note.
For power details about SED vs. non-SED drive, please refer to section 7.8.