Seagate ST33221A Product Manual - Page 12
Pin 1, Interface, connector, Power
View all Seagate ST33221A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
8 Medalist 8641, 6531, 4321 and 3221, Rev. B Interface connector Power connector Pin 1 Figure 4. Cable connectors Note. If you are mounting the drive in a 5.25-inch drive bay, you need a mounting adapter or frame kit. Contact your computer dealer. Some computers also require drive mounting rails, which can be obtained from your distributor or computer manufacturer. 5. Attach a power cable to each drive. If your computer does not have an unused power connector, you can purchase a Yshaped power cable from your computer dealer. 6. Check all cable connections and then replace your computer cover. Continue to "Configuring Your Computer."
8
Medalist 8641, 6531, 4321 and 3221, Rev. B
Figure 4. Cable connectors
Note.
If you are mounting the drive in a 5.25-inch drive bay, you
need a mounting adapter or frame kit. Contact your com-
puter dealer. Some computers also require drive mount-
ing rails, which can be obtained from your distributor or
computer manufacturer.
5.
Attach a power cable to each drive. If your computer does not
have an unused power connector, you can purchase a Y-
shaped power cable from your computer dealer.
6.
Check all cable connections and then replace your computer
cover. Continue to “Configuring Your Computer.”
Pin 1
Interface
connector
Power
connector