Seagate ST33221A Product Manual - Page 6
What you need, Before you begin - drive
View all Seagate ST33221A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 Medalist 8641, 6531, 4321 and 3221, Rev. B What you need • Straight-edge and Phillips screwdrivers • Four 6-32 UNC drive mounting screws • An ATA interface cable (max length: 18 inches) with available 40-pin connector • An unused drive power cable for your new drive Before you begin • Make sure your computer is turned off before you open the case. • Read the handling precautions at the right and inspect the drive to make sure that it is not damaged. • Save your foam-lined Seagate® disc drive box. This box has been approved by Seagate for shipping a Seagate disc drive. Using any other container or packing material voids your drive warranty.
2
Medalist 8641, 6531, 4321 and 3221, Rev. B
What you need
•
Straight-edge and Phillips screwdrivers
•
Four 6-32 UNC drive mounting screws
•
An ATA interface cable (max length: 18 inches) with
available 40-pin connector
•
An unused drive power cable for your new drive
Before you begin
•
Make sure your computer is turned off before you open the
case.
•
Read the handling precautions at the right and inspect the
drive to make sure that it is not damaged.
•
Save your foam-lined Seagate
disc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.