Home » Seagate Manuals » Hard Drives » Seagate ST800FM0053 » Manual Viewer

Seagate ST800FM0053 Seagate 1200 SSD Product Manual - Page 27

Abort, Product warranty, Managed Life, Limited Warranty with Media Usage, Shipping, Product

View all Seagate ST800FM0053 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

5.3.6.2.5 Abort There are several ways to abort a diagnostic. Applications can use a SCSI Bus Reset or a Bus Device Reset message to abort the diagnostic. Applications can abort a DST executing in background mode by using the abort code in the DST Function Code field. This will cause a 01 (self-test aborted by the application client) code to appear in the self-test results values log. All other abort mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition). 5.3.7 Product warranty See "Seagate Technology Support Services" on page 1 for warranty information. Warranty terms will vary based on type of warranty chosen: "Managed Life Warranty" or "Limited Warranty with Media Usage". Consult the Seagate sales representative for warranty terms and conditions. Managed Life This warranty is term based and includes the Lifetime Endurance Management feature stated in section 6.2.6. Limited Warranty with Media Usage This warranty is based on the shorter of term and endurance usage of the drive. Shipping When transporting or shipping a drive, use only a Seagate-approved container. Keep the original box. Seagate approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids the drive warranty. Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in transit. Contact the authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier experienced in handling computer equipment. Product repair and return information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty. Storage The maximum recommended storage period for the drive in a non-operational environment is 90 days. Drives should be stored in the original unopened Seagate shipping packaging when ever possible. Once the drive is removed from the Seagate original packaging the recommended maximum period between drive operation cycles is 30 days. During any storage period the drive non-operational temperature, humidity, wet bulb, atmospheric conditions, shock, vibration, magnetic and electrical field specifications should be followed. SEAGATE 1200 SSD PRODUCT MANUAL, REV. A 21

Section	Page
Seagate® 1200 SSD	1
Seagate Technology Support Services	7
1.0 Scope	8
2.0 Applicable standards and reference documentation	9
2.1 Standards	9
2.1.1 Electromagnetic compatibility	9
2.1.2 Electromagnetic compliance	9
2.1.3 European Union Restriction of Hazardous Substances (RoHS)	10
2.1.4 China Restriction of Hazardous Substances (RoHS) Directive	10
2.2 Reference documents	11
3.0 General description	12
3.1 Standard features	12
3.2 Media description	13
3.3 Performance	13
3.4 Reliability	13
3.5 Formatted capacities	13
3.6 Programmable drive capacity	14
3.7 Factory-installed options	14
3.8 Thin Provisioning	14
3.8.1 Logical Block Provisioning	14
3.8.2 Thin Provisioning capabilities	14
3.8.3 UNMAP	14
3.8.4 FORMAT UNIT command	15
3.8.5 Protection Information (PI) and Security (SED)	15
4.0 Performance characteristics	16
4.1 Internal drive characteristics	16
4.2 Performance characteristics	16
4.2.1 Response time	16
4.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes)	17
4.2.3 Performance	17
4.3 Start/stop time	19
4.4 Cache control	20
4.4.1 Caching write data	20
4.4.2 Prefetch operation	20
5.0 Reliability specifications	21
5.1 Error rates	22
5.1.1 Unrecoverable Errors	22
5.1.2 Interface errors	22
5.2 Endurance Management	22
5.2.1 Wear Leveling	22
5.2.2 Garbage Collection	22
5.2.3 Write Amplification	22
5.2.4 UNMAP	22
5.2.5 Data Retention	23
5.2.6 Lifetime Endurance Management (Available on select models)	23
5.2.7 SSD Percentage Used Endurance Indicator	23
5.3 Reliability and service	23
5.3.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF)	23
5.3.2 Preventive maintenance	23
5.3.3 Hot plugging the drive	23
5.3.4 S.M.A.R.T.	24
5.3.5 Thermal monitor	25
5.3.6 Drive Self Test (DST)	25
5.3.7 Product warranty	27
6.0 Physical/electrical specifications	28
6.1 Power specifications	28
6.1.1 Power consumption	28
6.2 AC power requirements	28
6.3 DC power requirements	29
6.3.1 Conducted noise immunity	37
6.3.2 Power sequencing	37
6.3.3 Current profiles	37
6.4 Power dissipation	40
6.5 Environmental limits	44
6.5.1 Temperature	44
6.5.2 Relative humidity	45
6.5.3 Effective altitude (sea level)	45
6.5.4 Shock and vibration	45
6.5.5 Air cleanliness	47
6.5.6 Corrosive environment	47
6.5.7 Electromagnetic susceptibility	47
6.6 Mechanical specifications	48
7.0 About FIPS	50
8.0 About self-encrypting drives	51
8.1 Data encryption	51
8.2 Controlled access	51
8.2.1 Admin SP	51
8.2.2 Locking SP	51
8.2.3 Default password	51
8.3 Random number generator (RNG)	51
8.4 Drive locking	52
8.5 Data bands	52
8.6 Cryptographic erase	52
8.7 Authenticated firmware download	52
8.8 Power requirements	53
8.9 Supported commands	53
8.10 Sanitize - Cryptographic Erase	53
8.11 RevertSP	53
8.12 Sanitize Feature Set on SED Drives	53
9.0 Defect and error management	54
9.1 Drive internal defects/errors	54
9.2 Drive error recovery procedures	54
9.3 SAS system errors	54
9.4 Auto-Reallocation	55
9.5 Protection Information (PI)	55
9.5.1 Levels of PI	55
9.5.2 Setting and determining the current Type Level	55
9.5.3 Identifying a Protection Information drive	55
10.0 Installation	56
10.1 Drive orientation	56
10.2 Cooling	56
10.3 Drive mounting	57
10.4 Grounding	57
11.0 Interface requirements	58
11.1 SAS features	58
11.1.1 Task management functions	58
11.1.2 Task management responses	58
11.2 Dual port support	58
11.3 SCSI commands supported	59
11.3.1 INQUIRY data	63
11.3.2 MODE SENSE data	64
11.4 Miscellaneous operating features and conditions	69
11.4.1 SAS physical interface	69
11.4.2 Physical characteristics	74
11.4.3 Connector requirements	74
11.4.4 Electrical description	74
11.4.5 Pin descriptions	74
11.4.6 SAS transmitters and receivers	75
11.4.7 Power	76
11.5 Signal characteristics	76
11.5.1 Ready LED Out	76
11.5.2 Differential signals	77
11.6 SAS-3 Specification compliance	77
11.7 Additional information	77
Numerics	78
A	78
B	78
C	78
D	78
E	78
F	79
G	79
H	79
I	79
J	79
L	79
M	79
N	80
O	80
P	80
Q	80
R	80
S	80
T	81
U	81
V	81
W	81

Match case Limit results 1 per page

EAGATE

1200 SSD P

RODUCT

ANUAL

, R

. A

5.3.6.2.5

Abort

There are several ways to abort a diagnostic. Applications can use a SCSI Bus Reset or a Bus Device Reset message to

abort the diagnostic.

Applications can abort a DST executing in background mode by using the abort code in the DST Function Code field. This

will cause a 01 (self-test aborted by the application client) code to appear in the self-test results values log. All other abort

mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition).

5.3.7

Product warranty

See “Seagate Technology Support Services” on page

for warranty information.

Warranty terms will vary based on type of warranty chosen: “Managed Life Warranty” or “Limited Warranty with Media

Usage”. Consult the Seagate sales representative for warranty terms and conditions.

Managed Life

This warranty is term based and includes the Lifetime Endurance Management feature stated in section 6.2.6.

Limited Warranty with Media Usage

This warranty is based on the shorter of term and endurance usage of the drive.

Shipping

When transporting or shipping a drive, use only a Seagate-approved container. Keep the original box. Seagate approved

containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids

the drive warranty.

Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in transit. Contact the

authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier

experienced in handling computer equipment.

Product repair and return information

Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction

any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.

Storage

The maximum recommended storage period for the drive in a non-operational environment is 90 days. Drives should be

stored in the original unopened Seagate shipping packaging when ever possible. Once the drive is removed from the

Seagate original packaging the recommended maximum period between drive operation cycles is 30 days. During any

storage period the drive non-operational temperature, humidity, wet bulb, atmospheric conditions, shock, vibration, magnetic

and electrical field specifications should be followed.