Home » Seagate Manuals » Hard Drives » Seagate ST800FM0053 » Manual Viewer

Seagate ST800FM0053 Seagate 1200 SSD Product Manual - Page 74

Table 23, SAS pin descriptions

View all Seagate ST800FM0053 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

11.4.2 Physical characteristics This section defines physical interface connector. 11.4.3 Connector requirements Contact a preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be provided in a future revision of this publication when production parts are available from major connector manufacturers. The SAS device connector is illustrated in Figures 23 and 24. 11.4.4 Electrical description SAS drives use the device connector for: • DC power • SAS interface • Activity LED This connector is designed to either plug directly into a backpanel or accept cables. 11.4.5 Pin descriptions This section provides a pin-out of the SAS device and a description of the functions provided by the pins. Table 23 SAS pin descriptions PIN SIGNAL NAME SIGNAL TYPE S1 S2* S3* S4 S5* S6* S7 S8 S9* S10* S11 S12* S13* S14 Port A Ground +Port A_in -Port A_in Port A Ground -Port A_out +Port A_out Port A Ground Port B Ground +Port B_in -Port B_in Port B Ground -Port B_out +Port B_out Port B Ground Diff. input pair Diff output pair Diff. input pair Diff output pair * - Short pin to support hot plugging NC - No connection in the drive. PIN P1* P2* P3 P4 P5 P6 P7 P8* P9* P10 P11* P12 P13 P14* P15* SIGNAL NAME NC (Vendor specific) NC (Vendor specific) NC (Vendor specific) Ground Ground Ground 5 Volts charge 5 Volts 5 Volts Ground Ready LED Ground 12 Volts charge 12 Volts 12 Volts SIGNAL TYPE Open collector out SEAGATE 1200 SSD PRODUCT MANUAL, REV. A 68

Section	Page
Seagate® 1200 SSD	1
Seagate Technology Support Services	7
1.0 Scope	8
2.0 Applicable standards and reference documentation	9
2.1 Standards	9
2.1.1 Electromagnetic compatibility	9
2.1.2 Electromagnetic compliance	9
2.1.3 European Union Restriction of Hazardous Substances (RoHS)	10
2.1.4 China Restriction of Hazardous Substances (RoHS) Directive	10
2.2 Reference documents	11
3.0 General description	12
3.1 Standard features	12
3.2 Media description	13
3.3 Performance	13
3.4 Reliability	13
3.5 Formatted capacities	13
3.6 Programmable drive capacity	14
3.7 Factory-installed options	14
3.8 Thin Provisioning	14
3.8.1 Logical Block Provisioning	14
3.8.2 Thin Provisioning capabilities	14
3.8.3 UNMAP	14
3.8.4 FORMAT UNIT command	15
3.8.5 Protection Information (PI) and Security (SED)	15
4.0 Performance characteristics	16
4.1 Internal drive characteristics	16
4.2 Performance characteristics	16
4.2.1 Response time	16
4.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes)	17
4.2.3 Performance	17
4.3 Start/stop time	19
4.4 Cache control	20
4.4.1 Caching write data	20
4.4.2 Prefetch operation	20
5.0 Reliability specifications	21
5.1 Error rates	22
5.1.1 Unrecoverable Errors	22
5.1.2 Interface errors	22
5.2 Endurance Management	22
5.2.1 Wear Leveling	22
5.2.2 Garbage Collection	22
5.2.3 Write Amplification	22
5.2.4 UNMAP	22
5.2.5 Data Retention	23
5.2.6 Lifetime Endurance Management (Available on select models)	23
5.2.7 SSD Percentage Used Endurance Indicator	23
5.3 Reliability and service	23
5.3.1 Annualized Failure Rate (AFR) and Mean Time Between Failure (MTBF)	23
5.3.2 Preventive maintenance	23
5.3.3 Hot plugging the drive	23
5.3.4 S.M.A.R.T.	24
5.3.5 Thermal monitor	25
5.3.6 Drive Self Test (DST)	25
5.3.7 Product warranty	27
6.0 Physical/electrical specifications	28
6.1 Power specifications	28
6.1.1 Power consumption	28
6.2 AC power requirements	28
6.3 DC power requirements	29
6.3.1 Conducted noise immunity	37
6.3.2 Power sequencing	37
6.3.3 Current profiles	37
6.4 Power dissipation	40
6.5 Environmental limits	44
6.5.1 Temperature	44
6.5.2 Relative humidity	45
6.5.3 Effective altitude (sea level)	45
6.5.4 Shock and vibration	45
6.5.5 Air cleanliness	47
6.5.6 Corrosive environment	47
6.5.7 Electromagnetic susceptibility	47
6.6 Mechanical specifications	48
7.0 About FIPS	50
8.0 About self-encrypting drives	51
8.1 Data encryption	51
8.2 Controlled access	51
8.2.1 Admin SP	51
8.2.2 Locking SP	51
8.2.3 Default password	51
8.3 Random number generator (RNG)	51
8.4 Drive locking	52
8.5 Data bands	52
8.6 Cryptographic erase	52
8.7 Authenticated firmware download	52
8.8 Power requirements	53
8.9 Supported commands	53
8.10 Sanitize - Cryptographic Erase	53
8.11 RevertSP	53
8.12 Sanitize Feature Set on SED Drives	53
9.0 Defect and error management	54
9.1 Drive internal defects/errors	54
9.2 Drive error recovery procedures	54
9.3 SAS system errors	54
9.4 Auto-Reallocation	55
9.5 Protection Information (PI)	55
9.5.1 Levels of PI	55
9.5.2 Setting and determining the current Type Level	55
9.5.3 Identifying a Protection Information drive	55
10.0 Installation	56
10.1 Drive orientation	56
10.2 Cooling	56
10.3 Drive mounting	57
10.4 Grounding	57
11.0 Interface requirements	58
11.1 SAS features	58
11.1.1 Task management functions	58
11.1.2 Task management responses	58
11.2 Dual port support	58
11.3 SCSI commands supported	59
11.3.1 INQUIRY data	63
11.3.2 MODE SENSE data	64
11.4 Miscellaneous operating features and conditions	69
11.4.1 SAS physical interface	69
11.4.2 Physical characteristics	74
11.4.3 Connector requirements	74
11.4.4 Electrical description	74
11.4.5 Pin descriptions	74
11.4.6 SAS transmitters and receivers	75
11.4.7 Power	76
11.5 Signal characteristics	76
11.5.1 Ready LED Out	76
11.5.2 Differential signals	77
11.6 SAS-3 Specification compliance	77
11.7 Additional information	77
Numerics	78
A	78
B	78
C	78
D	78
E	78
F	79
G	79
H	79
I	79
J	79
L	79
M	79
N	80
O	80
P	80
Q	80
R	80
S	80
T	81
U	81
V	81
W	81

Match case Limit results 1 per page

EAGATE

1200 SSD P

RODUCT

ANUAL

, R

. A

11.4.2

Physical characteristics

This section defines physical interface connector.

11.4.3

Connector requirements

Contact a preferred connector manufacturer for mating part information. Part numbers for SAS connectors will be provided in

a future revision of this publication when production parts are available from major connector manufacturers.

The SAS device connector is illustrated in Figures 23 and 24.

11.4.4

Electrical description

SAS drives use the device connector for:

•

DC power

•

SAS interface

•

Activity LED

This connector is designed to either plug directly into a backpanel or accept cables.

11.4.5

Pin descriptions

This section provides a pin-out of the SAS device and a description of the functions provided by the pins.

Table 23

SAS pin descriptions

IGNAL NAME

IGNAL TYPE

IGNAL NAME

IGNAL TYPE

Port A Ground

P1*

NC (Vendor specific)

S2*

+Port A_in

Diff. input pair

P2*

NC (Vendor specific)

S3*

-Port A_in

NC (Vendor specific)

Port A Ground

Ground

S5*

-Port A_out

Diff output pair

Ground

S6*

+Port A_out

Ground

Port A Ground

5 Volts charge

Port B Ground

P8*

5 Volts

S9*

+Port B_in

Diff. input pair

P9*

5 Volts

S10*

-Port B_in

P10

Ground

S11

Port B Ground

P11*

Ready LED

Open collector out

S12*

-Port B_out

Diff output pair

P12

Ground

S13*

+Port B_out

P13

12 Volts charge

S14

Port B Ground

P14*

12 Volts

P15*

12 Volts

* - Short pin to support hot plugging

NC - No connection in the drive.