Seagate ST9500621SS Constellation.2 SATA Product Manual - Page 13

Formatted capacity, Default logical geometry - hard drive

Page 13 highlights

Drive specification Drive acoustics, sound power (bels) Active Idle** Nonrecoverable read errors Annualized Failure Rate (AFR) Warranty Load/Unload cycles Supports Hotplug operation per Serial ATA Revision 2.6 specification ST91000640NS ST91000641NS ST91000642NS ST9500620NS ST9500621NS ST9500622NS ST9250610NS ST9250611NS ST9250612NS 2.8 (typical) 2.2 (typical) 1 sector per 1015 bits read 0.62% To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 300,000 (25°C, 50% rel. humidity) (600,000 design life testing) Yes *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 3.2 Formatted capacity Model ST91000640NS ST91000641NS ST91000642NS ST9500620NS ST9500621NS ST9500622NS ST9250610NS ST9250611NS ST9250612NS Formatted capacity* 1000 GB 500 GB 250 GB Guaranteed sectors 1,953,525,168 976,773,168 488,397,168 Bytes per sector 512 *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 3.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. See Section 7.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes. 3.3 Default logical geometry Cylinders 16,383 Read/write heads 16 Sectors per track 63 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n-1, where n is the number of guaranteed sectors as defined above. Constellation.2 Serial ATA Product Manual, Rev. F 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

Constellation.2 Serial ATA Product Manual, Rev. F
7
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels
.
3.2
Formatted capacity
Model
Formatted
capacity*
Guaranteed
sectors
Bytes per sector
ST91000640NS
ST91000641NS
ST91000642NS
1000 GB
1,953,525,168
512
ST9500620NS
ST9500621NS
ST9500622NS
500 GB
976,773,168
ST9250610NS
ST9250611NS
ST9250612NS
250 GB
488,397,168
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
3.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of guaranteed sectors as defined above
.
See Section 7.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-
bit addressing support of drives with capacities over 137 Gbytes.
3.3
Default logical geometry
Cylinders
Read/write heads
Sectors per track
16,383
16
63
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of guaranteed sectors as defined above
.
Drive acoustics, sound power (bels)
Active
2.8
(typical)
Idle**
2.2
(typical)
Nonrecoverable read errors
1 sector per 10
15
bits read
Annualized Failure Rate (AFR)
0.62%
Warranty
To determine the warranty for a specific drive, use a web browser to access the
following web page:
http://www
.seag
ate.com/www/en-us/support/warranty_&_returns_assistance
From this page, click on the “Verify Your Warranty” link. You will be asked to provide
the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for your drive.
Load/Unload cycles
300,000 (25°C, 50% rel. humidity) (600,000 design life testing)
Supports Hotplug operation per
Serial ATA Revision 2.6 specification
Yes
Drive specification
ST91000640NS
ST91000641NS
ST91000642NS
ST9500620NS
ST9500621NS
ST9500622NS
ST9250610NS
ST9250611NS
ST9250612NS