Seiko 7T84 Manual - Page 10

English Example: When the restart setting function is activated during the stopwatch measurement after the 5-minute yacht timer finishes counting down , and 4 minutes has elapsed since then. Yacht timer starts. (button A) Keep pressing button A for 2 seconds (Timer restarts.) Stopwatch starts. Stopwatch restarts. 5"00 interval Yacht timer operation Timer 5"00 elapsed Elapsed time 5"00 interval 5"00 interval 5"00 interval Stopwatch Timer Stopwatch 4"00 elapsed Timer starts from 1"00 to go. * For the 5-minute yacht timer, restarts of the stopwatch occur at 5-minute intervals from the start of measurement. * For the 6-minute or 10-minute yacht timer, restarts of the stopwatch occur at 6-minute or 10-minute intervals respectively from the start of measurement. 20 u For actual yacht racing, the restart setting function can be used in 5 minute yacht timer measurements as follows: Race proceedings Warning signal Start signal General recall signal Restart signal Yacht timer starts. (button A) Stopwatch starts. 5"00 interval 5"00 interval Keep pressing button A for 2 seconds (Timer restarts.) 5"00 interval Stopwatch restarts. Yacht timer operation Timer Stopwatch Timer Stopwatch 5"00 elapsed Elapsed time 7"30 elapsed Timer starts from 2"30 to go. * The general recall signal is a signal issued when a number of yachts make false starts or violate racing rules and the race committee is unable to identify or the starting procedures are incorrect. * For detailed rules on yacht racing, check the appropriate racing rules of each race. 21 English