Seiko 7T84 Manual - Page 17
Hand Position Adjustment, Necessary Procedure After Battery, Change
View all Seiko 7T84 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English TIME 5 Necessary procEdure after battery change After the battery is replaced with a new one, or when an abnormal display appears, follow the procedures below to reset the built-in IC. The watch will resume its normal operation. l HOW TO RESET THE IC 1. Pull out the crown to the second click. 2. Press button A and B at the same time. 3. Push the crown back in to normal position and check if the hands move as normal. A CROWN B * Resetting the IC will initialize the watch. Before starting to use the watch, it will be necessary to set the time and adjust the STOPWATCH hands to the 0 position. Refer to HAND POSITION ADJUSTMENT and TIME MODE sections of this manual. 34 English LM LOC HAND POSITION ADJUSTMENT (mode indicator, center hand, hands of the small watch) u Hand position adjustment is a procedure required when the hands are not correctly aligned for use in the STOPWATCH or TIMER functions, or after the battery is changed or the built-in IC is reset. For example, when the hands are not pointing to the 0 position even after the stopwatch is reset. After hand position adjustment is carried out, it is necessary to set the time. l How to adjust the positions of the mode indicator, center hand and the hands of the small watch 6 10TMRCHR A MODE SELECT CROWN Pull out to second click. The small second hand will stop on the spot. * If the crown is pulled out while the timer or stopwatch is measuring time, the measurement will be forcibly terminated and the timer or the stopwatch will be reset. 35