Seiko 7T84 Manual - Page 5

English TIME 5 TIME 5 English LM LOC LM LOC TIME MODE l Time setting procedures include hand settings of the main watch and small watch to the current time. l The hands should be correctly aligned to the 0 position (initial position) before starting to set the time. If they are not correctly aligned to the 0 position, it is necessary to correct their alignment before setting the time. To correct the hand alignment, refer to HAND POSITION ADJUSTMENT. l How to set the time (main watch and small watch) Small second hand 6 10TMRCHR A MODE SELECT CROWN Pull out to second click when the small second hand is at the 12 o'clock position. The small second hand will stop on the spot. * If the crown is pulled out while the timer or stopwatch is measuring time, the measurement will be forcibly terminated and the timer or the stopwatch will be reset. 10 Hour hand Minute hand 6 10TMRCHR A MODE SELECT CROWN Turn to set the time of the main watch. * The moment the date changes is midnight. When setting the hour hand, be sure that AM/PM is set correctly. * While doing so, set the minute hand 4 to 5 minutes ahead of the correct time, and then slowly move it back to the exact minute(s). Small watch B Press to set the time for the small watch. With each press of button B the small watch hands will advance 1 minute. Pressing and holding button B will advance the small watch hands rapidly. B CROWN Upon completion of all set tings, push back in to normal position simultaneously with a time signal. 11