Sennheiser ADN C1 Instructions for Use - Page 152
Mic Loudspeaker Mute, XLR Mix Minus, Request, Override, Use the Conference Manager soft
View all Sennheiser ADN C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
If a problem occurs ... Problem Possible cause Possible solution Page Contributions coming from The "Mic Loudspeaker Mute" function Deactivate the "Mic Loudspeaker the conference units' micro- is activated (the conference units' Mute" function. phones are not reproduced built-in loudspeakers and headphones via the conference units' sockets are deactivated for contribu- built-in loudspeakers and tions coming from the conference headphones sockets units' microphones). 58 or 131 The audio signals of the IN audio input are not output at the OUT audio output The "XLR Mix Minus" function for fil- Deactivate the "XLR Mix Minus" tering the audio signals of the IN audio function. input from the audio signals of the OUT audio output is activated. 58 or 131 Occurrence of double audio signals during a video- or teleconference The volume of the conference units' loudspeakers is too high. The "XLR Mix Minus" function for avoiding double audio is deactivated. Reduce the floor channel volume. 76, 130 or 140 Activate the "XLR Mix Minus" function. 58 or 131 After switch-on, the delegate units only indicate requests to speak You are using ADN D1 delegate units exclusively. The conference mode chosen requires a chairperson unit for granting speaking privileges (e.g. "Request"). Set a conference mode which does not require the grant of speaking privileges. Use an ADN C1 chairperson unit to grant speaking privileges. 50 or 126 74 Use the "Conference Manager" soft- 137 ware to grant speaking privileges. Delegate unit is automati- The speaking time limit is activated. Deactivate or increase the speaking 52 or 128 cally deactivated time limit. A further speaker has made a request to speak in "Override" mode. Change the conference mode. Increase the number of speakers who can take the floor simultaneously. 50 or 126 51 or 127 No request to speak can be The maximum number of requests to Increase the maximum number of made speak has been reached. requests to speak. 52 or 128 The signal light ring · does The function is deactivated. not flash when a request to speak is made Wait until one of the current speakers - passes on his or her speaking privileges. Activate the function. 54 or 128 No audio recording on USB mass storage device possible The data storage device is not formatted. The power supply for the USB mass storage device is not sufficient. Format the USB mass storage device - as NTFS or FAT32 file system Connect the external power supply of - the USB mass storage device or use the two USB connections for powering the USB mass storage device. The data transmission speed is too low. Use a USB mass storage device with - USB 2.0 interface. Use a shielded USB cable. - ADN Digital Conference System | 151