Sennheiser ADN C1 Instructions for Use - Page 44
ADN_MediaCtrl_Protocol.pdf, Connecting the media control system to the central unit
View all Sennheiser ADN C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Putting the conference system into operation Connecting the media control system to the central unit To enable communication between the central unit and the media control system: ̈ Make sure that the network communication between the central unit and the media control system is not blocked by a proxy server and/or a firewall. Port 53252 is used for communication. ̈ Connect the media control system to the central unit via the IP address of the central unit. The central unit serves as a socket server and communicates with the media control system via TCP and port 53252. For more information on setting the IP address of the central unit, refer to the following chapters: - "Adjusting network settings - "Network" submenu" on page 70, - "Adjusting the network settings" on page 84, - "Adjusting network settings" on page 98. Programming the media control system Depending on the media control system used, you can individually program the graphical interface and the operating sequences and adapt them to your requirements. You can find all information on the control commands and output instructions of the conference system for programming the media control system in the PDF document "ADN_MediaCtrl_Protocol.pdf" included on the DVD-ROM (supplied with the central unit) or at www.sennheiser.com. For more questions on the integration of the ADN conference system into a media control system, contact your Sennheiser partner. ADN Digital Conference System | 43