Sennheiser SK 300 G3 Instructions for Use - Page 15

Using the bodypack transmitter ̈ Exit the operating menu. ̈ Slide the MUTE switch · to the left, to the position MUTE. The bodypack transmitter reacts as indicated in the table. The current state of the muting function or the RF signal is displayed on the display panel of the bodypack transmitter. An additional display of the muting function appears on the receiver's display panel when • the pilot tone function is activated on both bodypack transmitter and receiver and, in addition, • this display has been activated via the "Warnings" menu item on the receiver (see the instruction manual of the receiver). 531.375MHz ብ ew300 G3 AF P MUTE ቨ Audio signal is muted Transmitter's display panel: "MUTE" ቨ is displayed Receiver's display panel: "TX Mute" is displayed* * only when activated on the receiver (see previous section) Audio signal is activated (muting is deactivated) Transmitter's display panel: "MUTE" ቨ is not displayed Receiver's display panel: "TX Mute" is not displayed RF signal is deactivated Transmitter's display panel: transmission icon ብ is not displayed, "MUTE" ቨ is displayed Receiver's display panel: "RF Mute" is displayed* * only when activated on the receiver (see previous section) RF signal is activated Transmitter's display panel: transmission icon ብ is displayed, "MUTE" ቨ is not displayed Receiver's display panel: "RF Mute" is not displayed 14