Sennheiser SK 300 G3 Instructions for Use - Page 9
Putting the bodypack transmitter into operation, Inserting the batteries/accupack, Charging
View all Sennheiser SK 300 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Putting the bodypack transmitter into operation Putting the bodypack transmitter into operation Inserting the batteries/accupack For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack (see "Accessories and spare parts" on page 31). ̈ Open the battery compartment by pushing the two catches ¹ in the direction of the arrows and open the cover ¸. ¹ ¶ ¸ ¸ ¶ ̈ Insert the two batteries or the accupack as shown above. Please observe correct polarity when inserting the batteries/accupack. ̈ Close the battery compartment. The battery compartment cover ¸ locks into place with an audible click. Charging the accupack To charge the bodypack transmitter with the BA 2015 accupack (see "Accessories and spare parts" on page 31) installed: ̈ Insert the bodypack transmitter into the L 2015 charger L 2015 (see "Accessories and spare parts" on page 31). The L 2015 charger can only charge the combination BA 2015 accupack/bodypack transmitter. Standard batteries (primary cells) or individual rechargeable battery cells cannot be charged in this way. Connecting the microphone cable/ instrument cable The audio input is designed for the connection of both condenser microphones and other audio sources. DC powering of the condenser microphones is via the audio input (3.5 mm jack socket MIC/LINE ³. ̈ Use one of the recommended Sennheiser microphones or the optional CL 2 line cable (see "Accessories and spare parts" on page 31). 8