Sennheiser SKM-S D1 User Manual - Page 22
Network Settings, Fixed IP
View all Sennheiser SKM-S D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Putting the products into operation ̈ Unscrew and remove the four screws located on the sides of the receiver housings. ̈ Secure the rack mount "ears" 1 to the sides of the receivers using the previously removed recessed head screws. Make sure that the angled ends of the rack mount "ears" point forward. ̈ Slide the receivers into the 19" rack. ̈ Secure the rack mount "ears" 1 to the rack using the recessed head screws 8. Connecting the receiver to a mixing console The receiver's ¼" (6.3 mm) jack socket 0 and the XLR-3 socket A are con- nected in parallel, allowing you to simultaneously connect two devices (e.g. amplifier, mixing console) to the receiver. 0 A ̈ Use a suitable cable to connect the mixing console to the ¼" (6.3 mm) jack socket 0 or the XLR-3 socket A. 6.3 mm XLR Connecting receivers in a network You can connect several receivers in a network using a router or a switch. This allows you to e.g. control, monitor and update all receivers and transmitters of a multi-channel system via a mobile device or a computer. "WSR" app Together with the "Wireless System Remote" (WSR) app, you can use one or several mobile devices to remotely configure all receivers and transmitters of a multi-channel system, to monitor their operation and to update the firmware of the devices (for details, see page 38). For this, your require a dual-band WiFi router, a sufficient number of network cables and at least one mobile device (tablet or smartphone). "Sennheiser D1 SL Updater" software You can use the "Sennheiser D1 SL Updater" software to update the device firmware (for details, see page 39). For this, you require any router or a switch, a sufficient number of network cables and a computer running Windows 7 or higher. Updating the firmware without a network If you do not have a router or a switch and only want to update the firmware: ̈ Assign the computer a static IP address. ̈ Assign the receiver a static IP address (Network Settings - Mode - Fixed IP) and then restart the receiver. ̈ Connect the receivers directly to the computer one after the other and update their firmware. To connect several receivers in a network using a router or a switch: 20