Home » Sennheiser Manuals » Microphones » Sennheiser SKM-S D1 » Manual Viewer

Sennheiser SKM-S D1 User Manual - Page 38

System Settings, System Info, Factory Reset, Network Settings, Fixed IP, Subnet, Gateway, Automatic

View all Sennheiser SKM-S D1 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Using the products Display Brightness 75 Help System System Info Factory Reset Exit ̈ Use a QR scanner (e.g. your smartphone or a reading device for QR codes) to scan the QR code that appears on the receiver display panel or follow the given link in your browser. Alternatively, you can click on the desired link in the above table. Retrieving system information You can display the serial number and the current firmware version of the receiver. ̈ Select System Settings - System Info. The serial number as well as the version number and the date of the current firmware are displayed. ̈ Press the ESC button to return to the operating menu. Help System Info System Factory Reset Exit Resetting the receiver to the factory default settings The System Settings - Factory Reset menu item allows you to reset the receiver to its factory default settings. After the reset, the receiver is restarted and the standard display is shown on the display panel. Changing the network configuration If you change a setting in the Mode, IP, Subnet and Gateway submenus of the Network Settings menu, you will be prompted to restart the receiver. ̈ Switch the receiver off and on again so that changes to the network configuration take effect. Changing the IP address assignment mode MAC 00:1B:66:7D:56:D3 Exit Network Mode Fixed IP IP 0.0.0.0. Subnet 0000 You can choose between static and dynamic IP address assignment. ̈ Select Network Settings - Mode. Setting Meaning Fixed IP The receiver is assigned a static IP address. You can enter the static IP address via the IP menu item. Automatic When switched on, the receiver is automatically assigned a dynamic IP address. Changing the IP address Exit Mode Fixed IP Network IP 0.0.0.0. Subnet 0.0.0.0. Gateway 0000 You can change the IP address of the receiver. The new IP address becomes effective only if Fixed IP has been selected in the Mode menu item. ̈ Select Network Settings - IP. ̈ Enter the IP address. ̈ Select Save and confirm by pressing the jog dial. Changing the subnet mask Mode Fixed IP IP 0.0.0.0. Network Subnet 0.0.0.0. Gateway 0.0.0.0. IPv6 1188:80F3:1388: You can change the subnet mask of the receiver. ̈ Select Network Settings - Subnet. ̈ Enter the subnet mask. ̈ Select Save and confirm by pressing the jog dial. 36

Section	Page
Contents	3
Important safety instructions 2	3
Optimum sound the easy way 5	3
Package contents 6	3
Product overviews 7	3
Putting the products into operation 15	3
Using the products 26	3
Cleaning and maintaining the products 42	3
If a problem occurs ... 44	3
Specifications 46	3
Accessories 54	3
Manufacturer Declarations 56	3
Important safety instructions	4
Risk of fire due to overloading	5
Safety instructions for antennas	5
Safety instructions for lithium-ion rechargeable batteries	5
Intended use	6
Optimum sound the easy way	7
Package contents	8
Product overviews	9
EM D1 rack receiver	9
Operating elements – front panel	9
Operating elements – rear panel	10
Displays and icons on the receiver's display panel	11
Standard display	11
Extended standard display	12
Power supply units for the receiver	12
SKM D1, SKM-S D1 and SK D1 transmitters	13
Operating elements of the SKM D1 and SKM-S D1 handheld transmitters	13
Operating elements of the SK D1 bodypack transmitter	14
Displays of the transmitters	15
Optional accessories for the transmitters	15
BA 10 accupack for the SKM D1 or SKM-S D1 handheld transmitter	15
BA 30 accupack for the SK D1 bodypack tranmsitter	15
USB power supply/charger for charging the accupacks	15
ME 3-II headset microphone	16
ME 2-2 clip-on microphone	16
Putting the products into operation	17
Avoiding sources of interference	17
Direct line of sight recommended	17
Putting the receiver into operation	18
Fitting the device feet	18
Mounting the rack mount “ears”	18
Connecting the rod antennas to the receiver	18
Mounting the receiver into a 19\	19
Mounting a single receiver into a rack	20
Mounting the rod antennas to the front of the rack	21
Mounting two receivers into a rack	21
Connecting the receiver to a mixing console	22
Connecting receivers in a network	22
“WSR” app	22
“Sennheiser D1 SL Updater” software	22
Connecting the receiver to the power supply system	23
Putting the bodypack transmitter into operation	24
Removing/inserting the batteries or the optional accupack	24
Attaching the bodypack transmitter to clothing	24
Connecting the clip-on microphone or the headset microphone to the bodypack transmitter	24
Preparing the headset microphone for use	25
Adjusting the microphone boom and the neckband padding	25
Using the windshield	25
Attaching the clip-on microphone to clothing	25
Putting the handheld transmitter into operation	26
Removing/inserting the batteries or the optional accupack	26
Changing the microphone head	26
Recharging the accupack	27
Using the products	28
Switching the devices on or off	28
Switching the receiver on	28
Switching the receiver off	28
Switching the bodypack transmitter on	28
Switching the bodypack transmitter off	28
Switching the handheld transmitter on	28
Switching the handheld transmitter off	29
Checking the charge status of the batteries or accupacks	29
Battery status display	29
Accupack status display	29
Checking the RF signal level	29
Muting the bodypack transmitter or the SKM-S D1 handheld transmitter	30
Pairing a receiver with a transmitter	30
Identifying paired devices	31
Using the devices in multi-channel operation	31
Switching between the standard display and the extended standard display	31
Using the operating menu of the receiver	32
Using the buttons for navigation	32
Overview of the operating menu of the receiver	32
Changing the name of the radio link	34
Activating/deactivating the low-cut filter	34
Adjusting the equalizer	34
Adjusting the de-esser	35
Activating/deactivating the dynamic compression	35
Resetting the audio settings	35
Coarsely adjusting the output level of the receiver (Mic/Line)	36
Fine-tuning the output level of the receiver	36
Activating/deactivating the lock mode	36
Activating/deactivating the MUTE switch of the transmitter	37
Adjusting the display brightness	37
Calling up help functions	37
Retrieving system information	38
Resetting the receiver to the factory default settings	38
Changing the network configuration	38
Changing the IP address assignment mode	38
Changing the IP address	38
Changing the subnet mask	38
Changing the gateway address	39
Displaying the IPv6 address	39
Displaying the MAC address	39
Performing a walk test (checking the reception quality)	39
Controlling, monitoring or updating devices via the network	40
“WSR” app	40
“Sennheiser D1 SL Updater” software	40
Monitoring devices using the “WSR” app	40
Performing firmware updates	41
Preparing the firmware update	41
Updating the receiver firmware using the “WSR” app	41
Updating the receiver firmware using the “Sennheiser D1 SL Updater” software	42
Updating the transmitter firmware	43
Cleaning and maintaining the products	44
Important safety instructions	44
Cleaning and maintaining the receiver	44
Cleaning the sound inlet basket of the handheld transmitter	44
If a problem occurs ...	46
Troubleshooting	46
Reacting to messages displayed on the display panel	47
Specifications	48
System	48
EM D1	48
SKM D1 and SKM-S D1	49
SK D1	49
Microphones	50
MMD 835-1	50
MMD 845-1	50
MMD 935-1	50
MMD 945-1	50
ME 2-2	50
ME 3-II	50
In compliance with:	50
Approved by:	50
Power supply units	51
NT 12-4C	51
NT 2-3	51
In compliance with:	51
Certified by:	51
Optional accupacks	52
BA 10	52
BA 30	52
In compliance with:	52
Certified by:	52
Dimensions	52
Receiver	52
Handheld transmitter	52
Bodypack transmitter	53
Licenses	53
CSR - aptX® Live Codec	53
Modified BSD licenses	53
GNU GPL version 2	54
Ubuntu Font License	54
Preamble	54
Permission & Conditions	54
Termination	55
Disclaimer	55
Accessories	56
Receiver	56
Mounting accessories for the receiver	56
Connection cable	56
Transmitters	56
Microphones for the bodypack transmitter	56
Microphone heads for the handheld transmitter	56
Windshields	56
Power supply units	56
Battery boxes and optional accupacks	57
Protective case	57
Manufacturer Declarations	58
Warranty	58
FOR AUSTRALIA ONLY	58
In compliance with the following requirements	58
CE Conformity	58

Match case Limit results 1 per page

Using the products

Use a QR scanner (e.g. your smartphone or a reading device for QR codes)

to scan the QR code that appears on the receiver display panel or follow the

given link in your browser.

Alternatively, you can click on the desired link in the above table.

Retrieving system information

You can display the serial number and the current firmware version of the

receiver.

Select

System Settings

–

System Info

The serial number as well as the version number and the date of the current

firmware are displayed.

Press the

ESC

button to return to the operating menu.

Resetting the receiver to the factory default settings

The

System Settings

–

Factory Reset

menu item allows you to reset the

receiver to its factory default settings.

After the reset, the receiver is restarted and the standard display is shown on

the display panel.

Changing the network configuration

Changing the IP address assignment

mode

You can choose between static and dynamic IP address assignment.

Select

Network Settings

–

Mode

Changing the IP address

You can change the IP address of the receiver. The new IP address becomes

effective only if

Fixed IP

has been selected in the

Mode

menu item.

Select

Network Settings

–

Enter the IP address.

Select

Save

and confirm by pressing the jog dial.

Changing the subnet mask

You can change the subnet mask of the receiver.

Select

Network Settings

–

Subnet

Enter the subnet mask.

Select

Save

and confirm by pressing the jog dial.

Exit

Display Brightness

Help

System Info

Factory Reset

System

Exit

Help

System Info

Factory Reset

System

If you change a setting in the

Mode

Subnet

and

Gateway

sub-

menus of the

Network Settings

menu, you will be prompted to restart

the receiver.

Switch the receiver off and on again so that changes to the network

configuration take effect.

Mode

Subnet

Fixed IP

0.0.0.0.

0000

MAC

00:1B:66:7D:56:D3

Network

Exit

Setting

Meaning

Fixed IP

The receiver is assigned a static IP address. You can enter the

static IP address via the

menu item.

Automatic

When switched on, the receiver is automatically assigned a

dynamic IP address.

Exit

Mode

Subnet

Gateway

Fixed IP

0.0.0.0.

0000

Network

Mode

Subnet

Gateway

IPv6 1188:80F3:1388:

Fixed IP

0.0.0.0.

Network