Home » Sennheiser Manuals » Microphones » Sennheiser SKM-S D1 » Manual Viewer

Sennheiser SKM-S D1 User Manual - Page 37

System Settings, Mute Switch, Display Brightness, Active, Deactivated, disabled, Setup, Guide,

View all Sennheiser SKM-S D1 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Using the products System Exit Auto Lock Off Mute Switch Active Display Brightness 75 Activating/deactivating the MUTE switch of the transmitter From the receiver, you can activate or deactivate the MUTE switch of the received transmitter. This setting determines whether or not the transmitter can be muted. ̈ Select System Settings - Mute Switch. Setting Meaning Active The MUTE switch of the transmitter is activated. Depending on the position of the MUTE switch of the received transmitter, either the icon for a muted transmitter ( ) or the icon for an unmuted transmitter ( ) appears on the standard display. Deactivated The MUTE switch of the transmitter is deactivated. The following icon appears on the standard display: If the MUTE switch of the transmitter is actuated, Mute disabled appears on the display panel of the receiver. System Auto Lock Off Mute Switch Active Display Brightness 75 Help System Info System Mute Switch Active Display Brightness 75 Help System Info Factory Reset Adjusting the display brightness The brightness of the receiver display panel can be adjusted in 16 steps. ̈ Select System Settings - Display Brightness. Turning the jog dial by one notch increases or reduces the brightness by 5%. The brightness can be reduced to a minimum of 25%. The brightness automatically dims after a few minutes. Calling up help functions For more information and help on the use and operation of your receiver or your system, you can call up different help functions by scanning the QR codes displayed on the receiver display panel or by following the links given below. ̈ Select System Settings - Help. ̈ Select the desired help function. Selection Setup Guide Help function QR code You are redirected to the page for downloading the setup guide. Link sennheiser.com/D1-setup Operation You are redirected Manual to the page for downloading this system manual. sennheiser.com/D1-manual FAQ & Support You are redirected to the FAQ/support page. sennheiser.com/D1-support Mobile App You are redirected to the page for downloading the app for your mobile device. sennheiser.com/D1-app 35

Section	Page
Contents	3
Important safety instructions 2	3
Optimum sound the easy way 5	3
Package contents 6	3
Product overviews 7	3
Putting the products into operation 15	3
Using the products 26	3
Cleaning and maintaining the products 42	3
If a problem occurs ... 44	3
Specifications 46	3
Accessories 54	3
Manufacturer Declarations 56	3
Important safety instructions	4
Risk of fire due to overloading	5
Safety instructions for antennas	5
Safety instructions for lithium-ion rechargeable batteries	5
Intended use	6
Optimum sound the easy way	7
Package contents	8
Product overviews	9
EM D1 rack receiver	9
Operating elements – front panel	9
Operating elements – rear panel	10
Displays and icons on the receiver's display panel	11
Standard display	11
Extended standard display	12
Power supply units for the receiver	12
SKM D1, SKM-S D1 and SK D1 transmitters	13
Operating elements of the SKM D1 and SKM-S D1 handheld transmitters	13
Operating elements of the SK D1 bodypack transmitter	14
Displays of the transmitters	15
Optional accessories for the transmitters	15
BA 10 accupack for the SKM D1 or SKM-S D1 handheld transmitter	15
BA 30 accupack for the SK D1 bodypack tranmsitter	15
USB power supply/charger for charging the accupacks	15
ME 3-II headset microphone	16
ME 2-2 clip-on microphone	16
Putting the products into operation	17
Avoiding sources of interference	17
Direct line of sight recommended	17
Putting the receiver into operation	18
Fitting the device feet	18
Mounting the rack mount “ears”	18
Connecting the rod antennas to the receiver	18
Mounting the receiver into a 19\	19
Mounting a single receiver into a rack	20
Mounting the rod antennas to the front of the rack	21
Mounting two receivers into a rack	21
Connecting the receiver to a mixing console	22
Connecting receivers in a network	22
“WSR” app	22
“Sennheiser D1 SL Updater” software	22
Connecting the receiver to the power supply system	23
Putting the bodypack transmitter into operation	24
Removing/inserting the batteries or the optional accupack	24
Attaching the bodypack transmitter to clothing	24
Connecting the clip-on microphone or the headset microphone to the bodypack transmitter	24
Preparing the headset microphone for use	25
Adjusting the microphone boom and the neckband padding	25
Using the windshield	25
Attaching the clip-on microphone to clothing	25
Putting the handheld transmitter into operation	26
Removing/inserting the batteries or the optional accupack	26
Changing the microphone head	26
Recharging the accupack	27
Using the products	28
Switching the devices on or off	28
Switching the receiver on	28
Switching the receiver off	28
Switching the bodypack transmitter on	28
Switching the bodypack transmitter off	28
Switching the handheld transmitter on	28
Switching the handheld transmitter off	29
Checking the charge status of the batteries or accupacks	29
Battery status display	29
Accupack status display	29
Checking the RF signal level	29
Muting the bodypack transmitter or the SKM-S D1 handheld transmitter	30
Pairing a receiver with a transmitter	30
Identifying paired devices	31
Using the devices in multi-channel operation	31
Switching between the standard display and the extended standard display	31
Using the operating menu of the receiver	32
Using the buttons for navigation	32
Overview of the operating menu of the receiver	32
Changing the name of the radio link	34
Activating/deactivating the low-cut filter	34
Adjusting the equalizer	34
Adjusting the de-esser	35
Activating/deactivating the dynamic compression	35
Resetting the audio settings	35
Coarsely adjusting the output level of the receiver (Mic/Line)	36
Fine-tuning the output level of the receiver	36
Activating/deactivating the lock mode	36
Activating/deactivating the MUTE switch of the transmitter	37
Adjusting the display brightness	37
Calling up help functions	37
Retrieving system information	38
Resetting the receiver to the factory default settings	38
Changing the network configuration	38
Changing the IP address assignment mode	38
Changing the IP address	38
Changing the subnet mask	38
Changing the gateway address	39
Displaying the IPv6 address	39
Displaying the MAC address	39
Performing a walk test (checking the reception quality)	39
Controlling, monitoring or updating devices via the network	40
“WSR” app	40
“Sennheiser D1 SL Updater” software	40
Monitoring devices using the “WSR” app	40
Performing firmware updates	41
Preparing the firmware update	41
Updating the receiver firmware using the “WSR” app	41
Updating the receiver firmware using the “Sennheiser D1 SL Updater” software	42
Updating the transmitter firmware	43
Cleaning and maintaining the products	44
Important safety instructions	44
Cleaning and maintaining the receiver	44
Cleaning the sound inlet basket of the handheld transmitter	44
If a problem occurs ...	46
Troubleshooting	46
Reacting to messages displayed on the display panel	47
Specifications	48
System	48
EM D1	48
SKM D1 and SKM-S D1	49
SK D1	49
Microphones	50
MMD 835-1	50
MMD 845-1	50
MMD 935-1	50
MMD 945-1	50
ME 2-2	50
ME 3-II	50
In compliance with:	50
Approved by:	50
Power supply units	51
NT 12-4C	51
NT 2-3	51
In compliance with:	51
Certified by:	51
Optional accupacks	52
BA 10	52
BA 30	52
In compliance with:	52
Certified by:	52
Dimensions	52
Receiver	52
Handheld transmitter	52
Bodypack transmitter	53
Licenses	53
CSR - aptX® Live Codec	53
Modified BSD licenses	53
GNU GPL version 2	54
Ubuntu Font License	54
Preamble	54
Permission & Conditions	54
Termination	55
Disclaimer	55
Accessories	56
Receiver	56
Mounting accessories for the receiver	56
Connection cable	56
Transmitters	56
Microphones for the bodypack transmitter	56
Microphone heads for the handheld transmitter	56
Windshields	56
Power supply units	56
Battery boxes and optional accupacks	57
Protective case	57
Manufacturer Declarations	58
Warranty	58
FOR AUSTRALIA ONLY	58
In compliance with the following requirements	58
CE Conformity	58

Match case Limit results 1 per page

Using the products

Activating/deactivating the MUTE switch of the transmitter

From the receiver, you can activate or deactivate the

MUTE

switch of the

received transmitter. This setting determines whether or not the transmitter

can be muted.

Select

System Settings

–

Mute Switch

Adjusting the display brightness

The brightness of the receiver display panel can be adjusted in 16 steps.

Select

System Settings

–

Display Brightness

Turning the jog dial by one notch increases or reduces the brightness by

5%. The brightness can be reduced to a minimum of 25%.

The brightness automatically dims after a few minutes.

Calling up help functions

For more information and help on the use and operation of your receiver or

your

system, you can call up different help functions by

scanning the QR codes displayed on the receiver display panel or by following

the links given below.

Select

System Settings

–

Help

Select the desired help function.

Auto Lock

Mute Switch

Display Brightness

Off

Active

System

Exit

Setting

Meaning

Active

The

MUTE

switch of the transmitter is activated.

Depending on the position of the

MUTE

switch of the received

transmitter, either the icon for a muted transmitter (

) or the

icon for an unmuted transmitter (

) appears on the standard

display.

Deactivated

The

MUTE

switch of the transmitter is deactivated. The follow-

ing icon appears on the standard display:

If the

MUTE

switch of the transmitter is actuated,

Mute

disabled

appears on the display panel of the receiver.

Auto Lock

Mute Switch

Display Brightness

Help

System Info

Off

Active

System

Mute Switch

Display Brightness

Help

System Info

Factory Reset

Active

System

Selection

Help function

QR code

Link

Setup

Guide

You are redirected

to the page for

downloading the

setup guide.

sennheiser.com/D1-setup

Operation

Manual

You are redirected

to the page for

downloading this

system manual.

sennheiser.com/D1-manual

FAQ &

Support

You are redirected

to the FAQ/sup-

port page.

sennheiser.com/D1-support

Mobile

App

You are redirected

to the page for

downloading the

app for your

mobile device.

sennheiser.com/D1-app