Sennheiser ew 100 G2 Instructions for Use - Page 82
Exiting the operating menu - ew 100 g2
View all Sennheiser ew 100 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
RESET Loading the factory-preset default settings Via the "RESET" menu, you can load the factory-preset default settings. Only the selected setting for the pilot tone remains unchanged. After the reset, the unit is restarted and the standard display is shown on the display panel. PILOT Activating/deactivating the pilot tone transmission or pilot tone evaluation Via the "PILOT" menu, you can activate or deactivate the pilot tone transmission of the transmitters and the pilot tone evaluation of the receivers. The pilot tone supports the squelch function (SQELCH) and protects against interference due to RF signals from other units. The transmitter adds an inaudible signal, known as the pilot tone, to the transmitted signal. The receiver detects and evaluates the pilot tone, and is thus able to identify the signal of the matching transmitter and mute all others. Transmitters of the ew 100 series (first generation) do not transmit a pilot tone and receivers of the ew 100 series (first generation) cannot evaluate the pilot tone. Nevertheless, you can combine units of the ew 100 series (first generation) with units of the ew 100 G2 series (second generation). However, when combining units, please observe the following: y With an ew 100 G2 transmitter and an ew 100 G2 receiver: Activate the pilot tone function with both transmitter and receiver. y With an ew 100 transmitter and an ew 100 G2 receiver or vice versa: Deactivate the pilot tone function with the ew 100 G2 transmitter or receiver. Activating/deactivating the lock mode LOCK Via the "LOCK" menu, you can activate or deactiveate the lock mode. The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation. The lock mode icon on the display indicates that the lock mode is activated. EM 100 G2 To deactivate the lock mode, first press the SET button. Then press the ̆/̄ buttons to select "Lock Off".If you confirm your selection by pressing the SET button, "LOC.OFF" appears on the display and the buttons can be operated as usual. EK 100 G2 Transmitters Exiting the operating menu Via the "EXIT" menu, you can exit the operating menu and return to the standard display. 35