Sharp 1551 AL-1551 Operation Manual - Page 20

NORMAL COPYING This copier has two document input stations - a reversing single pass feeder (RSPF) for automatic document feeding and an original table for manual handling of documents.The RSPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighing from 14 to 23 lbs. When copying from the RSPF, two-side originals can be copied automatically without having to manually turn them over. Automatic two-sided copying can also be performed with this copier. When copying from onesided originals to two-sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge. 3 A AA A A A A A Making copies Turn on Long Edge Turn on Short Edge G When making two-sided copies from the original table, the copy paper size must be letter. When making two-sided copies from the RSPF, letter, legal, and invoice sizes can be used. Non-standard size paper cannot be used. G When making two-sided copies from the RSPF, a multiple number of copies cannot be set. G When making two-sided copies, the bypass tray cannot be used. G When using two-sided invoice size originals from the RSPF, be sure to place them in the landscape orientation. Otherwise, an original misfeed will occur. 1 Ensure that paper of the desired size is set in the paper tray. See page 13, LOADING COPY PAPER. When copying onto paper larger than 8-1/2" x 11" size, pull out the paper output tray extension. If you use another tray, use the tray select ( ) key to select the desired paper tray. 2 Turn the power switch on. 3 Place the original(s) face up in the document feeder tray or face down on the original table. 18