Sharp 1551 AL-1551 Operation Manual - Page 23
Press the left copy quantity key to set the tens
![]() |
UPC - 074000074385
View all Sharp 1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
NORMAL COPYING 5 Ensure that the desired paper tray is selected. G Paper sizes that can be used in the duplex copy mode are letter, legal, and invoice. (When copying from the original table in the duplex copy mode, only letter size paper can be used.) G The bypass tray cannot be used in the duplex copy mode. 200% MAX. 129% 51/2x81/2 81/2x11 100% 100% 78% 81/2x14 81/2x11 64% 81/2x11 51/2x81/2 ZO 50% MIN. 3 Making copies 6 Set the number of copies using the two copy quantity ( , ) keys when copying from the original table or copying in a 1-sided copy mode from the RSPF. G Press the clear ( ) key to clear an entry if a mistake is made. G A single copy can be made with the initial setting, i.e., when "0" is displayed. ZOOM Tens digit Unit digit G Press the right copy quantity key to set the unit digit from 0 to 9. This key will not change the tens digit. G Press the left copy quantity key to set the tens digit from 1 to 9. 7 Press the print ( ) key. G To display the number of copies made in a continuous run, press the left copy quantity key. G To stop copying in the middle of a run, press the clear ( ) key. Copying will stop and the number in the display will be reset to "0". 21
![](/manual_guide/products/sharp-al1551-al1551-operation-manual-90dbabd/23.png)