Sharp 1551 AL-1551 Operation Manual - Page 24
Exposure Adjustment/photo Copying
UPC - 074000074385
View all Sharp 1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NORMAL COPYING 8 When making two-sided copies from the original table, place the second original on the original table and press the print ( ) key. To cancel two-sided copying after scanning the first original, press the clear ( ) key. Stream feeding mode The stream feeding mode allows easy operation of continuous copying from the RSPF. If the stream feeding mode has been enabled using user program No.4, the RSPF ( ) indicator will blink approximately 5 seconds after the last original has been fed by the RSPF. While this indicator is blinking, any new originals placed in the document feeder tray will be fed and 3 copied automatically. If the stream feeding mode has been disabled, the print ( ) key must be pressed each time the originals are set even immediately after completion of a copy run from the RSPF. The default setting of the stream feeding mode is "ON". See page 27, USER PROGRAMS. Making copies EXPOSURE ADJUSTMENT/PHOTO COPYING Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually. 1 Set the original and check the copy paper size. 2 Press the exposure mode selector key to select the manual ( ( ) mode. ) mode or photo 22