Sharp 1551 AL-1551 Operation Manual - Page 43
Troubleshooting
![]() |
UPC - 074000074385
View all Sharp 1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
TROUBLESHOOTING If any problem occurs, check the list below before contacting our Technical Assistance Department. Problem Possible cause Solution Copier does not operate. Blank copies Power save ( ) indicator on. Copies are too dark or too light. Dust, dirt, smudges appear on copies. Striped copies Paper misfeeds frequently. Images rub off the copy easily. Copier plugged in? Power switch on? Side cover closed securely? Front cover closed? Is the original placed face down on the original table or face up in the RSPF? Is the copier in the preheat mode? Is the copier in the auto power shut-off mode? Is original image too dark or too light? Is the copier in the automatic exposure mode? Is the copier in the photo exposure mode? Original table or original cover dirty? Original smudged or blotchy? Is transfer charger clean? Non-standard paper used? Paper curled or damp? Pieces of paper inside copier? Paper guides in the paper tray not set properly? Too much paper in the paper tray or bypass tray? Is the copy paper too heavy? Paper damp? Plug the copier into a grounded outlet. Turn the power switch on. Gently close the side cover. Gently close the front cover and then close the side cover. Place the original face down on the original table or face up in the RSPF. Press any key to cancel the preheat mode. Press the print ( ) key to cancel the auto power shut-off mode. Adjust the exposure manually. Adjust the automatic exposure level. Cancel the photo exposure mode. Clean regularly. Use a clean original. Clean the transfer charger. Use standard paper. If using special papers, feed the paper through the bypass tray. Store copy paper flat in the wrapper in a dry location. Remove all pieces of misfed paper. Set the guides properly depending on the paper size. Remove excessive paper from the tray. Use copy paper within the specified range. Replace with dry copy paper. If the copier is not used for long time, remove the paper from the paper tray and store it in its wrapper in a dry location. See page: 15 16 - - 18 26 26 22 43 22 32 - 33 17 - 35 13 14 17 46 6 41 Copier trouble?
![](/manual_guide/products/sharp-al1551-al1551-operation-manual-90dbabd/43.png)