Sharp 25R-S100 25RS100 Operation Manual - Page 34
Using the Video and Audio Input Jacks Continued
View all Sharp 25R-S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using the Video and Audio Input Jacks (Continued) L To watch video material playback. • Press the Remote's INPUT to select VIDEO INPUT mode to which the video equipment you want to playback is connected. • The external VIDEO INPUT mode will change as follows each time the INPUT is pressed. AIR or CABLE INPUT 1 (IN-1) Rear INPUT 2 (IN-2) Front • INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to the lowest channel. Note: • When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. • It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be obtained from copyright owners whenever necessary. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cords can be obtained from your local video store. 34