Sharp 37D40U LC-37D40U LC-45D40U Operation Manual - Page 31
Useful adjustment settings, Input Skip, Standby Mode, Language setting, Image position
UPC - 074000363205
View all Sharp 37D40U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Useful adjustment settings Input Skip This setting allows you to skip the HDMI Input on the Input Selection operation. 1 Press MENU and the MENU screen displays. Language setting You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Setup". 3 Press a/b to select "Input Skip", and then press ENTER. 4 Press a/b to select the Input (INPUT 4 or INPUT 5) you wish to skip, and then press ENTER. Input 4 (HDMI) Input 5 (HDMI) 2 Press c/d to select "Setup". 3 Press a/b to select "Language", and then press ENTER. 4 Press a/b to select the desired language listed on the screen, and then press ENTER. 5 Press MENU to exit. Yes No Image position For adjusting a picture's horizontal and vertical position. 5 Press c/d to select "Yes", and then press ENTER. 6 Press MENU to exit. Standby Mode Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Setup". 3 Press a/b to select "Standby Mode", and then press ENTER. 4 Press a/b to select "Mode1" or "Mode2", and then press ENTER. 1 Press MENU and the MENU screen displays. 2 Press c/d to select "Setup". 3 Press a/b to select "Position", and then press ENTER. 4 Press a/b to select "H-Pos." or "V-Pos.". H-Pos. [ 0] a10 b10 V-Pos. [ 0] a20 b20 Reset Selected item H-Pos. V-Pos. Description Centers the image by moving it to the left or right. Centers the image by moving it up or down. Selected item Mode1 Mode2 Description Starting TV is quick from standby. Power consumption is small at the standby. 5 Press MENU to exit. 30 5 Press c/d to adjust the item to the desired position. 6 Press MENU to exit. NOTE • For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER. • Adjustments are stored separately according to input source. • You can easily move the image position as shown on this page, but when the power is switched off the image will return to the previously memorized position.