Sharp 37D40U LC-37D40U LC-45D40U Operation Manual - Page 7

Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) "AAA" size battery (g2) AC cord (g1) Page 8 Cable Clamp (g1) Page 8 Cable tie (g1) Stand unit (g1) Page 7 Operation manual (g1) Page 7 Page 7 Page 6 NOTE • Always use the AC cord supplied with the TV. QUICK REFERENCE Attaching the stand • Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1. Confirm the 8 screws supplied with the TV. Short screws (m4) Long screws (m4) (used in step 2) (used in step 4) 2. Attach the two parts of the stand unit to each other using the 4 short screws and the hex key (supplied with the product) as shown. Short screw 3. Insert the stand into the opening on the bottom of the TV. Soft cushion Hex key 4. Insert and tighten the 4 long screws into the 4 holes on the rear of the TV. Hex key Long screw NOTE • To detach the stand, perform the steps in reverse order.