Sharp 37D40U LC-37D40U LC-45D40U Operation Manual - Page 45
Other viewing options, Freezing images, Presetting remote control function
UPC - 074000363205
View all Sharp 37D40U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Other viewing options Freezing images Allows you to capture and freeze an image from a moving image that you are watching. Presetting remote control function You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. 1 Press FREEZE. • A moving image is captured. 2 Press FREEZE again to cancel the function. NOTE • When this function is not available, "No displaying still image available." will display. • The still image automatically goes out after 30 minutes. • If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be cancelled and a V-CHIP BLOCK message will appear. Presetting manufacturer codes 1 Press FUNCTION until the LED for your device lights up. 2 After the LED for your device lights up, press FUNCTION and DISPLAY at the same time to enter the code registration mode. The LED will blink. 3 Press 0-9 to enter the manufacturer code. (See page 45.) • Preset mode is finished once the LED no longer lights up. 4 After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.) 44