Sharp 37D40U LC-37D40U LC-45D40U Operation Manual - Page 8

QUICK REFERENCE STOP! To safely remove the AQUOS television from the box It's best to use 2 people to remove the AQUOS television for stability. 1. Use the cardboard holders on either side of the AQUOS television to remove it from the box. 2. Remove the cardboard; however, keep the wrapping on the AQUOS television to protect it while moving. 3. Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water. The AQUOS television is designed for AC use only and should be used with supplied AC cord. Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners. The screen is glass and can be scratched or broken when dropped or impacted. QUICK INSTALLATION TIPS 1. Attach your antenna to the back of the TV. (See page 13.) 4. How to turn on the AQUOS television for the first time. A) Press POWER on AQUOS television. 2. Connect the AC plug for the AQUOS television into the AC outlet. POWER B) POWER indicator on the front of the AQUOS television lights GREEN. AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. NOTE • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 3. Place the Ferrite core in the space indicated in the below figure and bundle the cords properly with a cable clamp and cable tie. POWER indicator NOTE • Speaker cannot be detached from the TV. • TV angle cannot be adjusted.