Sharp AJ-5030 AJ-5030 Interface Software Manual - Page 19
Selecting the Scan Source
![]() |
View all Sharp AJ-5030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table of Contents Introduction Scanning Working with Imaging Files Printing Using the Sharp Control Panel Index TOP 18 Selecting the Scan Source If you already have a scanner connected to your computer, you must specify the scan source in the SHARP Desktop in order to switch between scanners. Follow the procedure below: 1 Open the Select Source dialog box by selecting Select Source... from the File menu of the SHARP Desktop.
![](/manual_guide/products/sharp-aj5030-aj5030-interface-software-manual-97c9567/19.png)
TOP
TOP
Printing
Index
Introduction
Scanning
Using the Sharp
Control Panel
Table of Contents
Working with
Imaging Files
18
Selecting the Scan Source
If you already have a scanner connected to your computer, you must
specify the scan source in the SHARP Desktop in order to switch
between scanners. Follow the procedure below:
1
Open the Select Source dialog box by selecting Select
Source... from the File menu of the SHARP Desktop.