Sharp AL-1551 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 58
Displaying Total Number Of Copies
![]() |
View all Sharp AL-1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Program No. Mode Parameters 1 Auto clear time 0 OFF, 1 10sec., 2 30sec. *3 60sec., 4 90sec., 5 120sec. 2 Preheat mode *0 30sec., 1 60sec., 2 90sec. 3 Auto power shut- off 0 2min., *1 5min., 2 15min., timer 3 30min., 4 60 min., 5 120min. 4 Stream feeding mode 0 OFF, *1 ON 5 Auto power shut- off mode 0 OFF, *1 ON 6 Resolution of AUTO & MANUAL mode *0 300dpi, 1 600dpi * Factory default settings are indicated with an asterisk (*). Program No. 4 can be selected on when your unit has the SPF/ RSPF. 5 Press the start ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored. To change the setting or to set another mode, press the clear ( ) key. The unit will return to step 2. 6 Press the light ( ) or dark ( ) key to return to the normal copy mode. DISPLAYING TOTAL NUMBER OF COPIES Use the following procedure to display the total number of copies. Press and hold down the clear ( ) key for approximately 5 seconds. The total number of copies will appear in two steps, each with three digits. Example: Total number of copies is 1,234. 56
![](/manual_guide/products/sharp-al1215-al1215al1530al1540al1551-operation-manual-abf31e5/58.png)