Sharp AL-1551 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 64
Status Indicators - code
View all Sharp AL-1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
STATUS INDICATORS When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page. Be sure to use only genuine SHARP parts and supplies. Indication Cause and remedy Page Steadily Replacement of drum cartridge will be needed Drum replacement lit soon. Prepare a new cartridge. 70 required indicator Blinking Drum cartridge must be replaced. Replace it with a new one. 58 TD cartridge replacement required indicator Steadily Replacement of TD cartridge will be needed lit soon. Prepare a new cartridge. Blinking TD cartridge must be replaced. Replace it with a new one. 70 57 A misfeed has occurred. Remove the misfed paper referring to the description of "MISFEED 63 Misfeed indicator Blinking REMOVAL". The lower side cover may be open. If so, close it. 66 SPF/RSPF misfeed indicator Blinking An original misfeed has occurred in the SPF/ RSPF. Remove the misfed originals referring to the description of "E: Misfeed in the SPF/RSPF". 66 Power save indicator is steadily lit. The unit is in the preheat mode. Press any key to cancel the preheat mode. 54 The unit is in the auto power shut-off mode. Press the start ( ) key to cancel the auto power 54 shut-off mode. The paper tray indicator is The paper tray is not installed properly. Push the blinking. tray into the unit securely. - "CH" is blinking in the display. "CH" is steadily lit in the display. "P" is blinking in the display. The TD cartridge is not installed. Check if the cartridge is installed. Side cover is open. Close the side cover securely by pressing the round projections near the side cover open button. The paper tray or multi-bypass tray is empty, or single bypass has been selected in the printer function. Load paper. A misfeed has occurred in the paper tray, single bypass or multi-bypass tray. Remove the misfed paper. 57 - 15, 17 63 A letter and a number appear The scan head locking switch is locked. Unlock alternately. the scan head locking switch. 9 The unit will not function. Turn the power switch A letter and a number appear alternately. off, remove the power cord from the outlet, and contact our Technical Assistance Department at 1-(630)378-3590 in the USA or 905-568-7140 in - Canada. 62