Sharp AL-1551 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 67
C: Misfeed in the transport area - toner cartridge
View all Sharp AL-1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
2 Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area". The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury. • Do not touch the surface of the drum (green portion) of the drum cartridge when removing the misfed paper. Doing so may cause smudges on copies. • Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies. 3 Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up. C: Misfeed in the transport area 1 Lower the fusing unit release lever. See "B: Misfeed in the fusing area" (p.64). 2 Open the front cover. To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.10). 3 Rotate the feeding roller in the direction of the arrow and gently remove the misfed paper from the exit area. Feeding roller 8 65