Sharp AL-1551 AL1215|AL1530|AL1540|AL1551 Operation Manual - Page 9
Setting Up The Unit - al 1551cs software
![]() |
View all Sharp AL-1551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 SETTING UP THE UNIT Follow the installation procedure below to use the unit properly. If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.61). SETUP PROCEDURE 2 When using the unit for the first time, setup the unit following the procedure shown below. 1 Open the package, and make sure that all the accessories are supplied with the unit. (p.8) 2 Remove the protective materials. (p.9) 3 Install the TD cartridge. (p.10) 4 Load the paper in the paper tray (p.15) or the multi-bypass tray*1 . (p.17) 5 Plug the other end of the power cord into the nearest outlet. (p.12) 6 Install the software.*2 (p.19) 7 Connect the interface cable*2 (p.45) and turn on the unit. (p.12) 8 Now, you can copy (p.46), print (p.33), or scan (p.34) your document. *1 The multi-bypass tray is only included with the AL-1551CS. *2 If you are only using the unit for copying, skip this step. 7
![](/manual_guide/products/sharp-al1215-al1215al1530al1540al1551-operation-manual-abf31e5/9.png)