Sharp AL-1610 AL-1600 AL-1610 Operation Manual - Page 13
SET-UP - td
View all Sharp AL-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GETTING STARTED Set-up SET-UP 1 Remove all pieces of tape. Then open the platen cover and remove the protective material. 2 Use a coin (or suitable object) to remove the screw. Store the screw in the paper tray as described in step 6 because it will be used if the copier has to be moved. (p. 42) 3 Install the TD cartridge. q For installation of the TD cartridge, see steps 1 to 2 and steps 4 to 7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25. 4 Gently lift and pull out the paper tray until it stops. 5 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray. 11
11
GETTING STARTED
SET-UP
1
Remove all pieces of tape. Then open the platen
cover and remove the protective material.
2
Use a coin (or suitable object) to remove the screw.
Store the screw in the paper tray as described in
step 6 because it will be used if the copier has to
be moved. (p. 42)
3
Install the TD cartridge.
●
For installation of the TD cartridge, see steps 1 to 2 and steps 4 to
7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25.
4
Gently lift and pull out the paper tray until it stops.
5
Remove the pressure plate lock. Rotate the
pressure plate lock in the direction of the arrow to
remove it while pressing down the pressure plate of
the paper tray.
Set-up