Sharp AL-1610 AL-1600 AL-1610 Operation Manual - Page 14
Ensure that the power switch of the copier is in - supplies
View all Sharp AL-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
SET-UP GETTING STARTED Pressure plate lock 6 Store the pressure plate lock which has been removed in step 5 and the screw which has been removed in step 2 in the front of the paper tray. q To store the pressure plate lock, rotate the lock to fix it on the relevant location. Screw Set-up Power on 12 7 Ensure that the power switch of the copier is in the OFF position. Plug the power cord into the nearest outlet. If you use the copier in a country other than the country where the copier was purchased, you will need to make sure that your local power supply is compatible with your model. If you plug the copier into an incompatible power supply, irreparable damage to the copier will result. Only insert the power cord into a properly grounded wall socket. Do not use extension cords or power strips. Connect the copier to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker. 8 Turn the power switch on. 9 Load copy paper. q When loading copy paper for the first time, be sure to turn the power switch on in advance. If you use copy paper other than 8-1/2" x 11" (default size), use user program No. 21 to set the paper size. See page 32. q For loading copy paper, see steps 2 to 4 of LOADING COPY PAPER on page 13.