Sharp AL-1610 AL-1600 AL-1610 Operation Manual - Page 21
Misfeed Removal
View all Sharp AL-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
MISFEED REMOVAL The copier will stop when a misfeed occurs. The misfeed ( ) indicator will blink. If paper is accidentally torn during removal, be sure to remove all pieces. Be careful not to damage the photoconductive drum. STATUS INDICATORS Misfeed removal Misfeed in the bypass tray 1 Gently pull the misfed paper out. 2 Lift slightly on the side cover and slide the cover out until it stops. Close the side cover by pressing the handle on the cover. q The misfeed ( ) indicator will go out. Misfeed in the copier 1 Open the bypass tray. Lift slightly on the side cover and slide the cover out until it stops. 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfed paper is seen from this side, proceed to "C. Misfeed in the transport area". If paper is misfed here, proceed to "B. Misfeed in the fusing area". If paper is misfed here, proceed to "A. Misfeed in the paper feed area". 28