Sharp AL-1610 AL-1600 AL-1610 Operation Manual - Page 16
Changing the copy paper size in the tray
![]() |
View all Sharp AL-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
LOADING COPY PAPER GETTING STARTED Loading copy paper Left guide Changing the copy paper size in the tray 1 Gently lift and pull out the paper tray until it stops. 2 Push the pressure plate down until it locks in place. 3 Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper. 4 Move the left guide to the appropriate slot as marked on the tray. Front guide q When using 11" x 17" copy paper, store the left guide in the slot at the left front of the paper tray. 5 Load copy paper into the tray. 6 Place the appropriate label to indicate the selected paper size into the recess on the right front side of the paper tray. 7 Push the paper tray firmly back into the copier. 8 Use user program No. 21 to set the selected paper size. See page 32. 14
![](/manual_guide/products/sharp-al1600-al1600-al1610-operation-manual-2ba4bda/16.png)